A water storage tank, often referred to as an overhead water tank, is a vital container or mini-reservoir designed for the purpose of storing water in a measured quantity. These tanks play a crucial role in various applications, serving both domestic and commercial needs. Over time, the materials used for constructing water tanks have evolved significantly. In the past, they were crafted from materials such as wood, stone, ceramics, and bricks, which were then plastered and painted to ensure water retention.
However, with the introduction of PVC tanks, the landscape of water storage changed dramatically. PVC quickly emerged as the most preferred tank material due to its inherent advantages, particularly its ability to prevent leakage effectively. Beyond material choices, there are various types of water storage tanks available, including overhead water tanks, underground water tanks, emergency tanks, and horizontal tanks, which are also known as space-saving tanks.
The selection of the appropriate type of water tank depends on specific requirements, intended applications, and various other factors that need to be taken into consideration. An overhead water tank, for instance, is often chosen when gravity feed or elevated water pressure is required for consistent and reliable water supply. These tanks are typically installed at a higher elevation to facilitate efficient water distribution to the intended areas.
INTRODUCTION TO OVERHEAD WATER STORAGE TANK
An overhead water storage tank, as the name suggests, is a typical water storage solution positioned above ground level, usually at an elevated height. These tanks can be constructed using various materials, but the primary goal is to maximize efficiency by placing the tank at an elevated location. Water is pumped into these tanks from ground level using high-powered motor pumps that deliver water to the storage tank with significant pressure.
These overhead water tanks can be installed in various locations, including within a town or even on the rooftop of a house. The primary objective is to ensure uniform water distribution and maintain a consistent water pressure and flow rate. When water is discharged from the tank and descends from its elevated position, it experiences a significant increase in pressure. This increase in pressure allows it to flow consistently and evenly from almost every outlet, serving its purpose effectively.
OVERHEAD WATER STORAGE TANK APPLICATIONS
Overhead water tanks are versatile and find utility in a wide range of applications, serving both domestic and commercial needs. These reservoirs play a pivotal role in maintaining a consistent water supply for various purposes, including general bathroom usage and the operation of water-requiring appliances. Whether you’re at home or in a commercial setting, an overhead water tank ensures that you have a reliable source of water at your disposal.
Domestic Application of Overhead Water Storage Tank
In domestic settings, the importance of an overhead water tank cannot be overstated. It plays a pivotal role in meeting the water requirements for various daily activities. From something as essential as drinking water to cooking, bathing, cleaning, washing, and fulfilling other general household needs, the overhead water tank serves as a lifeline.
One of its crucial functions is to ensure a continuous and reliable water supply to appliances such as washing machines and purifiers. These appliances demand a consistent flow of water to operate efficiently, and the overhead water tank is the solution to this demand at the domestic level. It ensures that these appliances have the necessary water supply to function effectively, making our daily routines more convenient and efficient.
Commercial Application of Overhead Water Storage Tank
Overhead water tanks play a crucial role in various commercial settings. These tanks offer multiple advantages, serving not only as water storage solutions but also as storage units for chemicals required to maintain smooth operations. They find utility in a wide range of commercial environments, including industrial buildings, hospitals, logistic yards, manufacturing facilities, and chemical industries.
In industrial settings, overhead water tanks provide a reliable source of water for various processes and firefighting purposes. Hospitals rely on these tanks to ensure a continuous supply of clean water for patient care and medical equipment. Logistic yards benefit from overhead tanks to meet the water needs of vehicles and personnel on-site.
Manufacturing facilities often require a consistent supply of water for various production processes, and overhead water tanks help ensure uninterrupted production. Additionally, chemical industries use these tanks to store and manage chemicals essential for their operations, maintaining a steady flow when needed.
In summary, overhead water tanks are indispensable in commercial contexts, offering versatility in storing both water and chemicals, thereby contributing to the smooth functioning of diverse businesses and industries.
MAINTENANCE OF OVERHEAD WATER STORAGE TANK
Maintaining your overhead water tank is crucial to ensure its longevity and the quality of the water it stores. By following a few simple maintenance steps for your overhead water tank, you can achieve several benefits.
Firstly, regular maintenance helps in keeping the tank rust-free and corrosion-free. This is essential to prevent the tank from deteriorating over time, ensuring that it continues to function effectively.
Moreover, a well-maintained overhead water tank can be easily cleaned, keeping it dirt-free. This cleanliness is vital to ensure that the water stored in the tank remains fresh and safe for various domestic purposes, such as cooking, drinking, and bathing. Nobody wants to use water that’s been contaminated by dirt and debris.
Additionally, through regular inspections during maintenance, you can identify any slight damage or issues at the earliest stage. Addressing these problems promptly can prevent them from worsening and can significantly increase the overall lifespan of your overhead water tank.
In conclusion, taking the time to perform routine maintenance on your overhead water tank is a wise investment. It not only keeps the tank in good condition but also ensures the quality of the water it provides for your daily needs.
- Clean the Tank Regularly.
To ensure the longevity and safety of your overhead water tank, it is crucial to conduct regular inspections and address potential issues such as corrosion, dust accumulation, and rust deposition. Your overhead water tank serves as the primary source of water supply for your daily needs, making its cleanliness a top priority.
While it may not be necessary to clean the tank frequently, it is advisable to schedule cleaning at least twice within a six-month period. We understand that cleaning the tank frequently may not be practically feasible, but this biannual cleaning routine can significantly contribute to maintaining the quality of water stored in the overhead water tank.
- Empty & Scrub the Tank
After completing the inspection procedure for your overhead water tank, it’s essential to properly maintain it. To do so, follow these steps:
1.Shutdown the Main Water Line: Before emptying the tank, ensure that the main water line running into the overhead water tank is securely shut down. This step is crucial to prevent any new water from entering the tank during cleaning.
2.Open All Water Supplied Taps: Open all the water taps supplied by the tank to let the water flow out and empty the tank completely. This will ensure that you’re working with an empty tank during the cleaning process.
3. Prepare for Cleaning: Before you begin cleaning, take safety precautions. Wear safety gloves to protect your hands during the cleaning process.
4.Scrub Every Nook and Corner: Use an abrasive tool or a scrubbing brush to thoroughly clean every nook and corner of the overhead water tank. It’s important to be meticulous in your cleaning efforts. If you notice dirt or sediment in certain areas, be sure to scrub them by hand until all deposits are cleared away.
Regular maintenance and cleaning of your overhead water tank are essential to ensure the quality and safety of the water it provides. By following these steps, you can help maintain the cleanliness and functionality of your tank.
- Disinfect the Tanks and Pipes
Utilize an appropriate cleaning solution, such as a household bleach solution diluted accordingly, to perform the cleaning procedure. This ensures effective disinfection of both the overhead water tank and associated pipes. Following the scrubbing and application of the bleach solution, thoroughly rinse the tank and pipes one to two times with clean water.
- Empty the Tank and Leave it for Drying
Following the aforementioned procedures, it is imperative to drain the overhead water tank and allow it to undergo a thorough drying process. Once the tank has completed the drying phase, a comprehensive final inspection must be conducted to identify any presence of contaminants such as dirt, rust, or residue from cleaning agents. If any such impurities are detected, they should be diligently cleansed from the affected areas using clean water and then meticulously dried.
- Refill the Tank and Use it
Once you have ensured the proper aesthetics and functionality of your overhead water tank, proceed with the refilling procedure. Confirm that all taps and outlets are securely closed, and proceed to open the main water supply to your elevated water storage container. Additionally, verify that the tank lids are correctly positioned and securely fastened.
FEATURES OF OVERHEAD WATER STORAGE TANK
Our Overhead Water storage tanks have some special attributes that can be used in the best way to obtain a cost-effective result :
-Made of 100% Virgin & Food Grade Material
-Available in Double & Triple Layers
-Easy to Fit
-Temperature resistance
-Capacity range from 200 L TO 10,000 L